Skip to content
Stroke & Stern

Retrospec Weekender 10'6

A 12 to 15 psi range is permission to inflate to 12, and that is a third less pumping than most of this registry.

By Scooter M. · Published September 2, 2026 · Last updated September 2, 2026

Paddle boards on a sunny shoreline
Disclosure Some links on this page are Amazon Associates links. If you buy through one we earn a commission at no extra cost to you. It does not change what we recommend or the order we recommend it in -- here is how we rank, and here is how the site is funded.
The short version
  • 17.5 lb, joint-lightest full board in this registry.
  • Published 12 to 15 psi range rather than a single target.
  • 275 lb rider limit and 32 in of width.
  • No published volume, so inflation time cannot be computed for it.

Most budget boards publish a single pressure figure or none at all. Retrospec publishes a range -- 12 to 15 psi -- and that is quietly the most useful thing on this spec sheet.

Why a range matters

A range is the manufacturer saying that a softer board is a legitimate way to use their product. Twelve psi is a slightly slower, slightly more forgiving board and a noticeably shorter pumping job.

The saving is more than the 11 percent reduction in free air suggests, because the strokes you skip are the last ones -- the single-action strokes against real back pressure, which are the ones that make people stop enjoying this. The two-phase model behind that is here.

Seventeen and a half pounds

Joint-lightest full-size board in this registry alongside the ROC Explorer, and 3.5 lb lighter than the NIXY Newport G5. Thirty-two inches of width and a 275 lb rider limit is a properly proportioned board rather than a stripped-out one.

Retrospec names the construction AerGlide-Lite, which like every proprietary laminate name in this category cannot be compared against another brand's. It is a name, not a specification.

The missing volume

No published volume figure, which means nobody -- not us, not any competitor -- can tell you how long this board takes to inflate. On a board sold substantially on how easy it is to get going, that is a strange thing to leave out.

It is also why this board appears in our weight ranking and not in our inflation table. The published pressure range partly compensates, since the range itself tells you the shape of the trade even if the absolute number is unavailable.

Who this is for, and who should skip it

A first board for somebody price-conscious who wants a real spec sheet rather than just a weight and a color. The pressure range genuinely improves the ownership experience.

Skip it if you want to plan around packed size or inflation time, neither of which Retrospec publishes. And skip it if you are near the 275 lb limit -- the Bluefin Cruise's 330 lb is a different amount of margin.

Retrospec Weekender 10'6: the published specification

Everything Retrospec publishes for this model, read on September 2, 2026. Rows marked "Not published" are gaps in the manufacturer's own specification -- we do not fill them with estimates.

Retrospec Weekender 10'6 published specifications
Weight (hull or board)17.5 lb
Weight (full system)Not published
Packed sizeNot published
Packed linear inchesNot published
Inflated10 ft 6 in x 32 in
Capacity275 lb
Working pressure15 psi
Floor pressureNot published
VolumeNot published
MaterialAerGlide-Lite drop-stitch
Chambers1
ValvesNot published
WarrantyNot published
Check price on Amazon

#ad We earn a commission if you buy through this link, at no extra cost to you. It never changes the ranking. How this site is funded. Prices checked September 2, 2026.

Questions people actually ask

Should I inflate the Weekender to 12 or 15 psi?
Both are inside Retrospec's published range. Fifteen is stiffer and quicker; twelve is a bit softer and meaningfully less pumping, because the strokes you skip are the hard single-action ones at the top. For learning, 12 is a perfectly reasonable place to start.
How long does the Retrospec Weekender take to inflate?
We cannot tell you, and neither can anyone else. Retrospec does not publish a board volume, and volume is the input the calculation runs on. What we can say is that a 10'6 x 32 x 6 board is broadly comparable in size to others in our registry that take 140 to 190 strokes, but that is a comparison rather than a computed figure for this board.
Is the Weekender good enough as a only board?
At 17.5 lb, 32 inches wide with a 275 lb rider limit, the published numbers are competitive with boards several times the price. What you give up is disclosure -- no volume, no packed size, no warranty term -- and recourse if something fails.
Units we claim to have tested: 0

Everyone in this category says they tested twenty boats. We have not tested any, and we say so. What we did instead: pulled the published specifications and the owner's manuals, computed the pump load and the packed volume for every model that publishes enough to compute them, checked the packed sizes against the airline limits you will actually meet, and cited every page we read. The full method.

Sources

Every specification on this page was read from one of these, on the date shown. Specs change between model years, so the date matters as much as the link.